LC7500 Aluminum Landing Craft Boat-Trawler Working Boat

Model NO.: Abelly LC750
Trademark: abelly
Transport Package: Special Jig
Specification: ISO9001-2008
Origin: China
Model NO.: Abelly LC750
Trademark: abelly
Transport Package: Special Jig
Specification: ISO9001-2008
Origin: China

The LC 7500 is a robust landing craft made of high grade marine aluminum with a 1.2 m (47 in) wide bow ramp. The landing craft is designed and tested for excellent and effortless sea handling and maneuverability in rough seas.
 
The V-angle hull, keel and stringers give stability and protection when landing on rocky shores. The hull is divided into three watertight compartments equipped with separate bilge pumps. Moreover, the LC 7500 has a protective rubber D80 fender. The landing craft has a high cargo capacity of 1500 kg (3307 lbs) that includes crew.
 
The hull is made of 5 mm (0.2 in) seawater resistant aluminum and welded in accordance with all workboat regulation standards. The flat flush self-draining deck has anti-skid aluminum plates. The storage compartments below deck are accessible through water tight hatches. The landing craft is equipped with four mooring bollards with a heavy duty towing post in the stern and four lifting points.
 
Three different versions are available, pending engine selection; outboard, twin outboard or sterndrive.
The LC 7500 landing craft is built in accordance with the Finnish Maritime Association (FMA) workboats regulations, EU directives, ISO standards and optionally other IACS standards.

The LC 7500 is a robust landing craft made of high grade marine aluminum with a 1.2 m (47 in) wide bow ramp. The landing craft is designed and tested for excellent and effortless sea handling and maneuverability in rough seas.
 
The V-angle hull, keel and stringers give stability and protection when landing on rocky shores. The hull is divided into three watertight compartments equipped with separate bilge pumps. Moreover, the LC 7500 has a protective rubber D80 fender. The landing craft has a high cargo capacity of 1500 kg (3307 lbs) that includes crew.
 
The hull is made of 5 mm (0.2 in) seawater resistant aluminum and welded in accordance with all workboat regulation standards. The flat flush self-draining deck has anti-skid aluminum plates. The storage compartments below deck are accessible through water tight hatches. The landing craft is equipped with four mooring bollards with a heavy duty towing post in the stern and four lifting points.
 
Three different versions are available, pending engine selection; outboard, twin outboard or sterndrive.
The LC 7500 landing craft is built in accordance with the Finnish Maritime Association (FMA) workboats regulations, EU directives, ISO standards and optionally other IACS standards.

Tire Inflator Gun Air Tools, Digital Tire Inflator Gun, Tire/tyre inflating inflator gun Air Pressure Gauge, Tire Inflator Gun Tire Pressure Gauge, 0-160 PSI Tyre Inflating Inflator Gun Air Pressure Pro Gauge 0-11 Bar


Tire inflator gun function: Inflating, measuring and pressure relief for tires. Reliability: With professional anti-vibration sheath, silicone oil, filling in a coffret pressure measuring more accurate, higher sensitivity. Surface treatment: Plastic spraying. Professional quality air tire inflator with gauge; Ideal for use on automotive, bicycle, motorbike, car, farm equipment tires and most inflatable; Hardened and tempered for maximum durability; Professional quality. Scales selection: bar, kpa, kg/cm2, psi. Inflation gun, chuck and gauge are all combined in one easy to use unit Clip design enables hands-free chuck use Built in relief valve for reducing in over-inflated tires Includes flexible hose for easier use Trigger controls airflow into tire Air inlet: 1/4" NPT (M).

Tire Inflator Gun

Tire Inflator Gun, Tire Inflator Gun Air Tools, Digital Tire Inflator Gun

NINGBO HAISHU SOONG AUTO PARTS CO., LTD. , http://www.soongautoparts.com