We all know that the summer temperatures are relatively high and will often be accompanied by the occurrence of heavy rain, so 12-ton cranes are prone to various breakdown problems. If we want to keep the 12-ton cranes in high performance in summer, it's necessary to have some common summer care methods.
1. Everyone who regularly drives 12 tons of cranes knows that the crane's engine must be able to maximize the working efficiency within a suitable temperature range. Therefore, if we want cranes to be well maintained, we must constantly check the cranes. The cooling system is operating normally. If the radiator is exposed to too much dust, the radiator must be cleaned as necessary.
2. It is easy to overheat and cause various expansion problems in the summer. Therefore, when refuelling a 12-ton crane, the refueling amount should not be excessive. The oil tank and pressure pipe filled with oil will burst due to high temperature. Imagine.
3, the lack of antifreeze will make the crane engine tank temperature is too high, and at this time some owners eager to reduce its temperature quickly, so will use cold water splashing cold water to carry out related cooling work. As everyone knows, this would cause an explosion in the cylinder of the 12-ton crane engine. Therefore, the correct approach should be, in the daily parking, try to park the 12-ton crane in a relatively cool place, while allowing the crane engine to maintain a low-speed rotation state, to be opened after the cover to allow the engine to cool to a suitable temperature After that, add antifreeze to the crane again.
4. Always keep the main cooling system of the crane condenser and water tank clean, and frequent cleaning can maintain the performance of both at a better level.
In addition to the emphasis placed on the 12-ton crane that was dropped on the above during the summer, it is also necessary to pay more attention to the cleanliness and cleanliness of the interior of the crane body to prevent rodents from biting the line during frequent activities in the crane. More importantly, do not store any items that are easy to catch fire inside the crane to avoid unnecessary damage caused by the explosion of such items.
solder ring Bronze Fittings produced as kembla and connex,the lead of the solder is much lower than them,solder ring bronze fittings,pre-solder bronze fittings,yorkshire solder ring fittings,connex solder ring fittings,solder ring gunmetal fittings,solder ring bronze fittings,pre-solder bronze fittings,yorkshire solder ring fittings,connex solder ring fittings,solder ring gunmetal fittings
solder ring bronze fittings,pre-solder bronze fittings,yorkshire solder ring fittings,connex solder ring fittings,solder ring gunmetal fittings
Taizhou Runde Company , https://www.zjbrassfittings.com